Menghubungkan Modem SmartFren Connex AC682 di Linux (Ubuntu)

Mulai dari bulan kemarin saya membeli modem SmartFren Connex AC682 ini. Karena saya liat sendiri teman-teman saya yang pake ini lumayan 'sejahtera' ngenetnya

Yaudah, klo di Windows gak ada masalah dalam pemakaiannya. Tapi klo di Linux, dia awalnya tidak terdetek sebagai usb drive biasa, tidak sebagai usb modem .

war@Net:~$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 004: ID 19d2:ffde ONDA Communication S.p.A.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 15d9:0a4c Trust International B.V.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 064e:a103 Suyin Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
war@Net:~$


Yaudah, agar dia terdetek sebagai USB modem, maka saya tulis seperti ini..
sudo eject /dev/sr1

war@Net:~$ sudo eject /dev/sr1


Yuk coba kita liat hasilnya, dia berubah atau belum..

war@Net:~$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 005: ID 19d2:ffdd ONDA Communication S.p.A.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 15d9:0a4c Trust International B.V.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 064e:a103 Suyin Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
war@Net:~$


Tau perbedaannya? Klo yang pertama itu dia tertulis sebagai "ffde", klo yg kedua "ffdd".
Lalu, selanjutnya apa? Belum konek juga neh. Oke oke..selanjutnya..
sudo modprobe usbserial vendor=0x19d2 product=0xffdd

war@Net:~$ sudo modprobe usbserial vendor=0x19d2 product=0xffdd


sudo wvdialconf

war@Net:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0 S1 S2 S3 S4 S5 S6 S7
Modem Port Scan<*1>: S8 S9 S10 S11 S12 S13 S14 S15
Modem Port Scan<*1>: S16 S17 S18 S19 S20 S21 S22 S23
Modem Port Scan<*1>: S24 S25 S26 S27 S28 S29 S30 S31
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: China TeleCom
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB2<*1>: ATQ0 V1 E1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: China TeleCom
ttyUSB2<*1>: Speed 9600: AT -- OK
ttyUSB2<*1>: Max speed is 9600; that should be safe.
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB2: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
war@Net:~$


Kalau ada notifikasi belum terinstall, silahkan lihat panduan instalasi WvDial di postingan yang lalu.

Okeh, disana sudah kedetek ada sebuah modem di /dev/ttyUSB0 dengan embel-embel "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" yang mewajibkan kita untuk mengedit file config wvdial-nya agar sesuai dengan settingan SmartFren-nya.
sudo gedit /etc/wvdial.conf
Lalu taro di baris paling pertama

[Dialer smart]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = 1
Modem Type = Analog Modem
Command Line = ATDT
ISDN = 0
New PPPD = yes
Phone = #777sudo
Modem = /dev/ttyUSB0
Username = smart
Password = smart
Baud = 460800


Okei, setelah langkah diatas sudah tak ada yang tertinggal, langkah terakhir adalah dial-up agar tersambung ke internet. bismillah..
sudo wvdial smart

war@Net:~$ sudo wvdial smart
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT#777sudo
--> Waiting for carrier.
ATDT#777sudo
CONNECT 3100000
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Mon Aug 29 11:31:07 2011
--> Pid of pppd: 2365
--> Using interface ppp0
--> pppd: P?[10] X?[10] `?[10] Xw[10]
--> pppd: P?[10] X?[10] `?[10] Xw[10]
--> pppd: P?[10] X?[10] `?[10] Xw[10]
--> pppd: P?[10] X?[10] `?[10] Xw[10]
--> local IP address 10.191.38.182
--> pppd: P?[10] X?[10] `?[10] Xw[10]
--> remote IP address 10.17.95.23
--> pppd: P?[10] X?[10] `?[10] Xw[10]
--> primary DNS address 10.17.3.244
--> pppd: P?[10] X?[10] `?[10] Xw[10]
--> secondary DNS address 10.17.3.252
--> pppd: P?[10] X?[10] `?[10] Xw[10]
war@Net:~$

Yaudah, selamat browsing deh